HPFP til N55 – Dorch HPFP

Produkt Data

Model: HPFP til N55

Højtrykspumpen fra DORCH, er et komplet plug-and-play-sæt til at kunne lave op til 550whp (dette tal kan variere en del afhængigt af tuning-strategi og blandingen af ​​ethanol). Der er ingen skæring af ledningsnet, ingen bøjning, ingen krympning osv. Dette fungere med fuld kontrol fra DME, ligesom OE-pumpen. Alt sikkerhed og styring forbliver stadig ved DME.

Information

25-40 hverdage

TÜV Godkendt?: Nej

Dorch siger om produktet:

This is a complete plug-and-play kit to support up to 550whp (this number can vary quite a bit depending on tuning strategy and the blend of ethanol). There’s no cutting, no bending, no crimping, etc. This kit drops right in with full control from the DME, just like the OEM pump. All of the safety and sophistication of the stock DME remain in place.
N55 HPFP Flow Capacities
The table below serves as a reference for maximum fuel flow in cubic centimeters per camshaft revolution for various N55 fuel pump options. These calculations are based on the N55 cam lobe. Each engine will have varying fuel flow capacities depending on the lift and number of lobes on the camshaft.
Pump Model Fuel Flow (cc/rev)
HDP5 (Stock N55) 0.837
HDP5 Evo (Stock B58) 0.897
HDP6 (Stock B58TU) 1.107
Dorch Engineering Stage 1 1.221
Dorch Engineering Stage 2 1.465

Software changes are required to run this pump. If using MHD or Bootmod3, simply check the box for our pump upgrade when flashing.. Otherwise, please send your .BIN file to tuning@dorchengineering.com for the appropriate software changes. This change is free of charge for all of our customers.
Kit Contents:
HPFP w/ Hardware
High Pressure Line
Low Pressure Line
Low Pressure Line Bracket
Plug-n-Play Adapter Harness
*ONLY 2013+ models with OE Bosch HPFP
KIT NOT COMPATIBLE with 2011-2012 N55 Vehicles

produktet skal monteres/køres ind af professionelle som kan montere / indkøre produktet
Ellers bortfalder garantien